Roland MC-909 사용자 설명서
120
Sample Edit
Emphasis
In some cases, the audio quality will be improved if you boost the
high-frequency range of an imported sample. Also, the high-
frequency range of the sample may be emphasized when you use a
sampler made by another manufacturer. In this case, you can
minimize the change in tonal character by attenuating the high-
frequency range.
high-frequency range of an imported sample. Also, the high-
frequency range of the sample may be emphasized when you use a
sampler made by another manufacturer. In this case, you can
minimize the change in tonal character by attenuating the high-
frequency range.
1.
Press [EMPHASIS].
Alternatively, hold down [SHIFT] and press [F2 (Emphasis)].
2.
Press [F1 (Sample List)] and select a sample.
3.
Use [VALUE] or [INC/DEC] to select the emphasis
type.
PreEmphasis:
Emphasizes the high-frequency range.
DeEmphasis:
Attenuates the high-frequency range.
4.
If you want to replace the current sample with the
emphasized sample, press [F4 (Over Write)] to
display the “
✔
” symbol.
5.
Press [F6 (Execute)].
A message will ask you for confirmation.
6.
To execute, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
Combine
This operation combines multiple samples into a single sample. You
can combine as many as sixteen samples. You can also place silent
spaces between the samples.
can combine as many as sixteen samples. You can also place silent
spaces between the samples.
1.
Press [COMBINE].
Alternatively, hold down [SHIFT] and press [F3 (Combine)].
2.
Press [F1 (Sample List)] and select a sample.
3.
Use [CURSOR] to select a parameter.
4.
Use [VALUE] or [INC/DEC] to set the value.
5.
Press [F6 (Execute)]
A message will ask you for confirmation.
6.
To execute, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
Parameter
Range
Explanation
1–16
The sample or silence to be combined
TYPE
Sample,
Time, Beat
Time, Beat
Sample:
sample
Time:
silent region (specified as
time)
Beat:
silent region (specified as a
note value)
BANK
U, C
Bank that contains the sample
U:
user
C:
card
* This will be displayed only if
TYPE is set to Sample.
PRM
1–10000 ms
note value:
1/32, 1/16T,
1/16, 1/8T,
1/8, 1/4T,
1/4, 1/2,
1/1, 2/1
1/32, 1/16T,
1/16, 1/8T,
1/8, 1/4T,
1/4, 1/2,
1/1, 2/1
Sample number, or the duration/
note value of the silent region
note value of the silent region
The note value is based on the
BPM of the sample immediately
before the silent region.
BPM of the sample immediately
before the silent region.
* If there is no sample immediate-
ly before the silent region, the
current BPM will be used.
current BPM will be used.
MC-909_Ref_e.book 120 ページ ２００５年３月１日 火曜日 午後３時２９分