Roland MC-909 사용자 설명서
126
System
Here you can make settings that affect the entire system, such as
those for tuning and synchronization.
those for tuning and synchronization.
1.
Press [MENU].
2.
Press [CURSOR (up/down)] to select “System.”
In Pattern mode/Song mode, you can also access this by
holding down [SHIFT] and pressing [F5 (System)].
holding down [SHIFT] and pressing [F5 (System)].
fig.6-01
3.
Press [ENTER].
The System menu will appear.
fig.6-02
4.
Press [F1]–[F6] to select the item that you want to
set.
5.
Press a function button to make further selections.
6.
Use [CURSOR (up/down)] to select a parameter.
7.
Use [VALUE] or [INC/DEC] to edit the value.
*
Settings made here will revert to their original value as soon as you
turn off the power. If you want to keep your settings, press
turn off the power. If you want to keep your settings, press
[F6
(System Write)]
.
8.
When you are finished making settings, press [EXIT].
You will return to the System menu.
9.
Press [EXIT] once again to exit the System menu.
[F1 (Panel/Control)]
(Panel/Controller)
(Panel/Controller)
Make settings for the panel control-
lers and the screen.
lers and the screen.
[F2 (Seq/MIDI)]
(Sequencer/MIDI)
(Sequencer/MIDI)
Make sequencer and MIDI-related
settings.
settings.
[F3 (Sound)]
Specify the tuning and how the
sounds are to be produced.
sounds are to be produced.
[F4 (Sampling)]
Make sampling-related settings.
[F5 (D Beam)]
Make D Beam settings.
[F6 (System Info)]
(System Information)
(System Information)
View the state of the MC-909.
MC-909_Ref_e.book 126 ページ 2005年3月1日 火曜日 午後3時29分