Roland MC-909 사용자 설명서

 

Part buttons [1]–[16] will select parts.

 

You can select the part for recording even while you are recording.

 

• Pressing [CURSOR (right)] will move the input location 

forward by the current Note Type value.

• Pressing [CURSOR (left)] will move the input location 

backward by the current Note Type value.

• Pressing [FWD] will advance the input location by one measure.

• Pressing [BWD] will return the input location by one measure.

 

You cannot move back to a position at which notes have already 
been input.

 

• Pressing [CURSOR (up/down)] will move the displayed region 

of notes upward or downward.

• Holding down [SHIFT] and pressing [FWD] will move the 

displayed region one measure forward.

• Holding down [SHIFT] and pressing [BWD] will move the 

displayed region one measure backward.

 

fig.1-49

 

Tempo changes and mute operations can be recorded on the 
dedicated tempo/mute part.

The recording procedure is essentially the same as for realtime 
recording.

 

Only changes in BPM (tempo) and changes in the part mute 
status will be recorded. No operations of the velocity pads, D 
Beam controllers, knobs, or sliders will be recorded.

• You can adjust BPM (tempo) by using [VALUE], [INC/DEC], or 

turntable emulation.

• For details on muting parts, refer to p. 26.

 

Rec Beat

2/4–7/4, 5/8–
7/8, 9/8, 12/8, 
9/16, 11/16, 
13/16, 15/16, 
17/16, 19/16

Pattern time signature
* Can be specified only for 

an empty pattern.

Rec Measure 
Length

1–998

Pattern length

Rec Count In

OFF, 1 MEAS, 
2 MEAS

Length of the count before re-
cording begins

Rec Loop Rest

OFF, ON

Insert a blank measure before 
you return to the beginning 
of the pattern

If this is ON, one blank 
measure will be inserted 
before you turn to the first 
measure of the pattern.

* This provides a convenient 

way to keep the end of the 
last measure from being re-
corded into the first mea-
sure.

MC-909_Ref_e.book 42 ページ ２００５年３月１日　火曜日　午後３時２９分