Roland MC-909 사용자 설명서

Pattern Mode

Pattern editing

Here’s how you can edit the performance data of a pattern in units of
measures. You can create completely new patterns by editing the
performance data of a pattern, or by combining various patterns.

You must stop the pattern before you can edit it.

Basic procedure for pattern

editing

Select the pattern that you want to edit.

Press [F2 (Edit)] to access the Pattern Edit Menu

screen.

fig.1-60

Select the region of measures that you want to edit.

•

Source From:

first measure of the region

If you set this to “SETUP,” the setup parameters (p. 18) will be
included.

•

Source End:

last measure of the region

If you set this to “SETUP,” only the setup parameters will be
selected, and no measures will be included.

Use the function buttons to select the type of editing

that you want to carry out.

The corresponding editing sub-window will appear.

fig.1-61

Press the part button [1]–[16] and [TEMPO/MUTE] of

the part(s) whose data you want to edit, illuminating

the relevant indicator(s).

Set the parameters, and press [F6 (Execute)].

To cancel the procedure, press [F5 (Cancel)].

The procedures for Extract a Rhythm Instrument and Pattern

Copy are explained on the next page.

When you are specifying the Note (Minimum/Maximum) in Pattern
Edit, you can specify the Minimum and Maximum by pressing two
velocity pads. First press Minimum, then press Maximum.
If you press one velocity pad twice, the Minimum and Maximum
will be the same.

[F1 (Micro Scope)]

Edit individual items of perfor-
mance data within a pattern. (p.
48)

[F2 (Copy)]

Copy a pattern. (p. 44)

[F3 (Erase)]

Erase unwanted data. (p. 45)

[F4 (Delete Measure)]

Delete unwanted measures. (p. 45)

[F5 (Insert Measure)]

Insert blank measures. (p. 45)

[F6 (Transpose)]

Transpose the pitch. (p. 45)