Roland VS-1824 사용자 설명서
116
Chapter 8 EZ Routing
Setting Up for Mixing Using Step
Editing
Editing
Select this when you want to adjust the balance of each track,
or to mix your song to an external two-track recorder. Select
this to use the Input Mixer during mixdown to mix external
sources along with your 18 tracks to the VS-1824’s stereo
MASTER mix outputs. If you want to cancel the settings
procedure before completing it, press [F6 (EXIT)] at any time.
or to mix your song to an external two-track recorder. Select
this to use the Input Mixer during mixdown to mix external
sources along with your 18 tracks to the VS-1824’s stereo
MASTER mix outputs. If you want to cancel the settings
procedure before completing it, press [F6 (EXIT)] at any time.
1. Press [EZ ROUTING].
The EZ Routing icon appears in the display.
2. Press [F5 (Exec)].
If “Exec” does not appear in the display above [F5], press
[PAGE] until you see “Exec,” and then press [F5 (Exec)].
[PAGE] until you see “Exec,” and then press [F5 (Exec)].
fig.02-18
3. Press [F2 (Mix)].
4. Specify which sources are to be output to the MIX bus.
Press the Input SELECT buttons and the Track SELECT
buttons for all mixer channels you want to include. Use
buttons for all mixer channels you want to include. Use
[
] and [
] to move the cursor and the TIME/
VALUE dial to select the V-Track you want to play back.
fig.02-25
5. Press [F2 (STEP
→
)].
6. Only the sources—Input Mixer Channels and Track
Mixer Channels—you specified during Step 4 will be
shown. Use [
], [
], [
], and [
] to move
the cursor and the TIME/VALUE dial to adjust each of
the values.
the values.
fig.02-26
7. Press [F2 (STEP
→
)]. You can return to the previous
screen by pressing [F1 (STEP
←
)].
8. Make the settings for the effects. Use [
], [
],
[
], and [
] to move the cursor and the
TIME/VALUE dial to adjust each of the values. Press
[F3 (FX A)] to make settings to EFFECT A (FX1/2); press
[F4 (FX B)] to make settings to EFFECT B (FX3/4).
[F3 (FX A)] to make settings to EFFECT A (FX1/2); press
[F4 (FX B)] to make settings to EFFECT B (FX3/4).
fig.02-27
9. Press [F2 (STEP
→
)]. You can return to the previous
screen by pressing [F1 (STEP
←
)].
Track assigned to the MIX bus
Source assigned to the MIX bus
Source
Track
V-Track
Cursor
Pan
Level
Input Channel
Track Channel
Effect
Switch
Switch
Send
Level
Level
Send
Pan
Pan
Cursor