Roland VS-1824 用户手册

Select this when you want to adjust the balance of each track, 
or to mix your song to an external two-track recorder. Select 
this to use the Input Mixer during mixdown to mix external 
sources along with your 18 tracks to the VS-1824’s stereo 
MASTER mix outputs. If you want to cancel the settings 
procedure before completing it, press [F6 (EXIT)] at any time.

1. Press [EZ ROUTING]. 

The EZ Routing icon appears in the display.

2. Press [F5 (Exec)]. 

If “Exec” does not appear in the display above [F5], press 
[PAGE] until you see “Exec,” and then press [F5 (Exec)].

fig.02-18

3. Press [F2 (Mix)].

4. Specify which sources are to be output to the MIX bus. 

Press the Input SELECT buttons and the Track SELECT 
buttons for all mixer channels you want to include. Use 

[

] and [

] to move the cursor and the TIME/

VALUE dial to select the V-Track you want to play back.

fig.02-25

5. Press [F2 (STEP 

→

)].

6. Only the sources—Input Mixer Channels and Track 

Mixer Channels—you specified during Step 4 will be 

shown. Use [

], [

], [

], and [

] to move 

the cursor and the TIME/VALUE dial to adjust each of 
the values.

fig.02-26

7. Press [F2 (STEP 

→

)]. You can return to the previous 

screen by pressing [F1 (STEP 

←

)].

8. Make the settings for the effects. Use [

], [

], 

[

], and [

] to move the cursor and the 

TIME/VALUE dial to adjust each of the values. Press 
[F3 (FX A)] to make settings to EFFECT A (FX1/2); press 
[F4 (FX B)] to make settings to EFFECT B (FX3/4).

fig.02-27

9. Press [F2 (STEP 

→

)]. You can return to the previous 

screen by pressing [F1 (STEP 

←

)].

Track assigned to the MIX bus

Source assigned to the MIX bus

Source

Track

V-Track

Cursor

Pan

Level

Input Channel

Track Channel

Effect 
Switch

Send 
Level

Send 
Pan

Cursor