Poulan DRT900 사용자 설명서

Do not operate tiller without muffler. Do not tamper with 

exhaust system. Damaged mufflers or spark arresters could 

create a fire hazard. Inspect pe ri odi cally and re place if nec-

 es sary. If your engine is equipped with a spark arrester 

screen assembly, re move every 50 hours for cleaning and 

inspection. Re place if dam aged.

Replace spark plugs at the beginning of each tilling sea-

 son or after every 50 hours of use, whichever comes first.  

Spark plug type and gap setting is shown in “PRODUCT 

SPEC I FI CA TIONS” on page 3 of this manual.

Once a season, lubricate the right hand side gear case 

grease fitting with 1 oz. of EP #1 Grease.

Do not clean your tiller when the engine and transmission 

are hot.  We do not rec om mend using pressurized water 

(gar den hose, etc.) to clean your unit un less the gasket 

area around the trans mis sion and the engine muf fler, air 

fil ter and car bu re tor are cov ered to keep wa ter out.  Wa ter 

in en gine will short en the useful life of your tiller. 
•  Clean engine, wheels, finish, etc. of all foreign mat-

ter.

• 

Keep finished surfaces and wheels free of all gas o line, 

oil, etc.

•  Protect painted surfaces with au to mo tive type wax.

Your engine is air cooled.  For proper engine performance 

and long life keep your engine clean.
•  Clean air screen frequently using a stiff-bristled-

brush.

•  Remove blower housing and clean as nec es sary.
•  Keep cylinder fins free of dirt and chaff.

Air Screen

eng

ine_

art_71

Cylinder Fins

Blower 

Housing

Muffler