Invacare Compressor 사용자 설명서

SECTION 2—INITIAL SETUP

Transporting the Compressor

WARNING

NEVER transport a compressor with a cylinder connected

to or stored on the compressor, otherwise injury or

damage can occur.

CAUTION

When transporting the compressor, be careful not to

bump the compressor or the connectors into obstacles.

Otherwise, damage to the compressor may occur.

NOTE: For this procedure, refer to FIGURE 2.1.
1. There are two methods to

safely transport the

compressor:
A. One hand - Grasp the

hand grip at the

bottom rear of the

compressor.

B. Two hands - Grasp

the hand grips on the

sides of compressor.

Installing the Power Cord

NOTE: For this procedure, refer to FIGURE 2.2 on page 14.
1. Ensure the compressor is on a hard flat stable surface, such

as a table or the Ready Rack.

2. Make sure the power switch is in the Off (O) position
3. Plug the power cord into the electric connector in the back

of the compressor.

Hand Grip