Oregon RMR616HGA 사용자 설명서

EN

11

When you press RESET, all settings will return

to default value, and you will lose all stored information.

Clean the product with a slightly damp cloth and alcohol-
free mild detergent. Avoid dropping the product or placing
it in a high-traffic location.

This product is designed to give you years of service if
handled properly. Observe the following guidelines:

• Never immerse the product in water. This can

cause electrical shock and damage the product.

• Do not subject the main unit to extreme force,

shock, or fluctuations in temperature or humidity.

• Do not tamper with the internal components.

• Do not mix new and old batteries or batteries of

different types.

• Do not use rechargeable batteries with this

product.

• Remove the batteries if storing this product for a

long period of time.

• Do not scratch the LCD display.

To  auto-scan between sensors, press and hold
CHANNEL  for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.

If you use a sensor that collects only

temperature data, humidity will not be shown.

Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records for the selected sensor. To
clear the records, press and hold MEM for 2 seconds.

A beep will sound to confirm that the memory has been
cleared.

The  RESET  buttons are located in the battery
compartments for the main unit and sensors. Press
RESET when you change the batteries and whenever
performance is not behaving as expected (for example,
unable to establish radio frequency link with remote
sensor or radio-controlled clock).

RMR616HGA lab test R2

1/17/04, 5:03 PM

11