Oregon RMR616HGA 사용자 설명서

EN

9

Perform this step if you cannot receive Atomic Clock
signals. Press and hold DOWN  for 2 seconds. Then,
manually set the clock following the "Set Clock"
instructions (below).

The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF.

To maximise Atomic Clock signal reception, the

main unit table stand should be fully opened until it locks
into place.

You only need to do this if you have disabled the Atomic

Clock feature (for example, if you are too far from or cannot

receive a signal).

1.

Press and hold MODE  for 2 seconds. The Clock
Area will blink.

2.

Select the offset hour, 12 / 24 hour format, hour,
minute, year, month, day, and language. Press UP
or DOWN to change the setting. Press MODE to
confirm.

The language options are (E) English,

(F) French, (D) German, (I) Italian, and (S) Spanish.

Press  MODE  to toggle between Clock with Seconds,
Clock with Weekday and Calendar, and Clock with Offset
Hour display.

This product has 2 alarms: a Single Alarm and a
Weekday Alarm. The Single Alarm can be set to go off
at a specific time for a one-time event (for example, if
you are napping on Saturday). The Weekday Alarm will
sound at the same time Monday - Friday (but not on
weekends).

Press ALARM to display the Alarm settings you wish to
view: Weekday 

W

 or Single 

S

 .

1.

Press ALARM to display the type of Alarm you wish
to set: Weekday or Single.

2.

Press and hold ALARM for 2 seconds. The Alarm
settings will blink.

3.

Select the hour and minute. Press UP or DOWN to
change settings. Press ALARM to confirm.

RMR616HGA lab test R2

1/17/04, 5:03 PM

9