Multiquip MVC-64HW 사용자 설명서

1. Place the

 fuel valve lever (Figure 11) in the "ON" position.

2. Place the

 Engine ON/OFF switch (Figure 12) in the "ON"

position.

3. Place the

 Choke Lever (Figure 13) in the "OPEN" position.

The  CLOSED  position of the
choke lever enriches the fuel
mixture for starting a COLD
engine. The  OPEN  position
provides the correct fuel mixture
for normal operation after
starting, and for restarting a
warm engine.

4. Place the

 throttle lever (Figure 14) halfway between fast

and 

slow.

5. Grasp the starter grip (Figure 15) and slowly pull it out. The

resistance becomes the hardest at a certain position, corre-
sponding the compression point. Rewind the rope a little from
that point and pull out sharply.

DO NOT attempt to operate the plate compactor
until the Safety, General Information and
Inspection sections of this manual have been
read and  thoroughly understood.

DO NOT pull the starter rope all the way to the end.

O NOT release the starter rope after pulling. Allow it to

rewind as soon as possible.