Siemens S50037 사용자 설명서

                                                         SieMo S50037 Data Book 

PRELIMINARILY

File Name: SieMo_S50037 Data Book.doc

 Page 

2/30

KEY Features

 Bluetooth 

V1.1 

prequalified

  Input sensitivity –85 dBm

 Point-to-multipoint 

functionality

  Firmware below HCI embedded, or stand alone operation

  Class 2 Bluetooth device, 2 dBm

  HCI optionally via high-speed UART, BCSP and USB

  Interface data rate UART to 1.5 MBPS, USB high speed 1.1 (12 MBPS)

  Frequency range 2.402 – 2.480 GHz

  Temperature range 0-40° centigrade (qualified)

  Mechanical outline 32.8 x 16.8 x 3 mm³ (34 x 18 x 3 mm³ for sample quantities)

  Power supply 3.25V-6V, Max. 120 mA

  GFSK modulation, frequency hopping, 79 channels spaced by 1 MHz

  Internal Crystal oscillator

  50 Ohm Antenna connector

 SMD 

mountable

Description:

The SieMo S50037 is a Class2 Bluetooth Module which can be integrated into various electronic
devices to give them Bluetooth functionality.
The connections to the environment consist of a single positive power supply, a 50 Ohm Antenna
connector, UART, SPI, BCSP USB and PCM Interface, 6 PIO lines, control signals for an external
Power Amplifier and one Pin which allows to switch between two different firmware versions.
SieMo is shipped as an HCI Module, which means that the lower Bluetooth stack up to HCI is
included in the Firmware and it can be changed into a stand-alone Module with the complete BT-
stack and some simple applications running on the module via a firmware upgrade.
The module supports synchronous voice transmission as well as asynchronous data transfer.