Siemens S50037 Manual Do Utilizador
SieMo S50037 Data Book
PRELIMINARILY
File Name: SieMo_S50037 Data Book.doc
Page
2/30
SieMo S50037
KEY Features
Bluetooth
V1.1
prequalified
Input sensitivity –85 dBm
Point-to-multipoint
functionality
Firmware below HCI embedded, or stand alone operation
Class 2 Bluetooth device, 2 dBm
HCI optionally via high-speed UART, BCSP and USB
Interface data rate UART to 1.5 MBPS, USB high speed 1.1 (12 MBPS)
Frequency range 2.402 – 2.480 GHz
Temperature range 0-40° centigrade (qualified)
Mechanical outline 32.8 x 16.8 x 3 mm³ (34 x 18 x 3 mm³ for sample quantities)
Power supply 3.25V-6V, Max. 120 mA
GFSK modulation, frequency hopping, 79 channels spaced by 1 MHz
Internal Crystal oscillator
50 Ohm Antenna connector
SMD
mountable
Description:
The SieMo S50037 is a Class2 Bluetooth Module which can be integrated into various electronic
devices to give them Bluetooth functionality.
The connections to the environment consist of a single positive power supply, a 50 Ohm Antenna
connector, UART, SPI, BCSP USB and PCM Interface, 6 PIO lines, control signals for an external
Power Amplifier and one Pin which allows to switch between two different firmware versions.
SieMo is shipped as an HCI Module, which means that the lower Bluetooth stack up to HCI is
included in the Firmware and it can be changed into a stand-alone Module with the complete BT-
stack and some simple applications running on the module via a firmware upgrade.
The module supports synchronous voice transmission as well as asynchronous data transfer.
devices to give them Bluetooth functionality.
The connections to the environment consist of a single positive power supply, a 50 Ohm Antenna
connector, UART, SPI, BCSP USB and PCM Interface, 6 PIO lines, control signals for an external
Power Amplifier and one Pin which allows to switch between two different firmware versions.
SieMo is shipped as an HCI Module, which means that the lower Bluetooth stack up to HCI is
included in the Firmware and it can be changed into a stand-alone Module with the complete BT-
stack and some simple applications running on the module via a firmware upgrade.
The module supports synchronous voice transmission as well as asynchronous data transfer.
-Module