Sharp AR-M205 사용자 설명서

7

Rotation copy

*2

0: OFF
1: ON

• When the auto paper select function is enabled 

and there is no paper that is the same size as 
the original and loaded in the same orientation, 
this function will automatically select paper of 
the same size that is loaded in the opposite 
orientation, and rotate the image 90 degrees so 
that it is copied on the paper in the correct 
orientation.

• When the auto ratio select function is operating 

and the original and paper are loaded in 
opposite orientations, this function rotates the 
image so that it is copied on the paper in the 
correct orientation.

8

Auto paper select mode

0: OFF
1: ON

• This function automatically selects paper that is 

the same size as the original placed in the 
SPF/RSPF, or the same size as that selected 
with the [ORIGINAL SIZE ENTER] key. The 
function can be disabled.

9

Auto tray switching

0: OFF
1: ON

• If the paper runs out during printing and there is 

paper of the same size and orientation in 
another tray, this function automatically 
switches to that tray (excluding the bypass 
tray). The function can be disabled.

10

 to 15

Auditing mode

–

See "Enabling Audit Mode". (p.50)

16

Erase width 
adjustment

*2

1: 0"
2: 1/4"
3: 1/2"
4: 3/4"
5: 1"

• Use this setting to set the width of erasure of 

shadows that appear around the edges and at 
the binding margin when a book or similar 
original is copied.

17

Layout in 2 IN 1 copy

*2

1: Pattern 1
2: Pattern 2

• Use this setting to select the layout pattern 

when two original pages are copied onto a 
single sheet of paper (see page 34 for the 
layout patterns).

18

Layout in 4 IN 1 copy

*2

1: Pattern 1
2: Pattern 2
3: Pattern 3
4: Pattern 4

• Use this setting to select the layout pattern 

when four original pages are copied onto a 
single sheet of paper (see page 34 for the 
layout patterns).

19

Offset of paper output 
tray

0: OFF
1: ON

• When enabled, this function offsets the position 

in the paper output tray of interrupt copy jobs, 
sets of copies during sort/group copy, and print 
jobs when using the printer function.

20

Image rotation in 
duplex copying

*3

0: OFF
1: ON

• When a one-sided vertical (portrait) original is 

placed in a horizontal orientation (8-1/2" x 14" 
or  11" x 17" size) for two-sided copying, the top 
and bottom of the images on the front and back 
of the paper will be opposite to each other.

21

Location of the 
margin

*2,*3

1: Left edge
2: Top edge

• Use this setting to switch between the margin at 

the top edge and the margin at the left edge.

22

Margin width

*2

1: 0"
2: 1/4"
3: 1/2"
4: 3/4"
5: 1"

• Use this setting to set the margin width.

23

Resolution in Auto/Text 
mode

1: 300dpi
2: 600dpi

• The copy resolution in auto and text mode is 

normally 300 dpi. If high-quality copies are 
preferred, use this setting to change the 
resolution to 600 dpi.

(factory default setting 

appears in bold)

*

2

On models with a dual function board.

*

3

On models with automatic two-sided copying.