JVC DT-R24L41D 사용자 설명서
19
<Functions controlled by the MAKE/TRIGGER system>
Display
Functions to be controlled
Opening
Short-circuiting
TALLY SEL
Selects the color of the tally lamp.
Green
Red
SDI 1
Changes the input to “SDI 1.”
Invalid
Valid
SDI 2
Changes the input to “SDI 2.”
Invalid
Valid
DVI
Changes the input to “DVI.”
Invalid
Valid
DT-R24L41D
VIDEO 1
Changes the input to “VIDEO 1.”
Invalid
Valid
VIDEO 2
Changes the input to “VIDEO 2.”
Invalid
Valid
DT-R17L4D
VIDEO
Changes the input to “VIDEO.”
Invalid
Valid
A.MARKER
The area marker indication
Off
On
S.MARKER
The safety marker indication
Off
On
FRAME
Indication of the area of the specifi ed aspect ratio
Off
On
C.MARKER
The center marker indication
Off
On
MARK.SEL
Selects the items of “MARKER”*
3
Non-“R-” items
“R-” items
ASPECT
Changes the aspect ratio.
4:3
16:9
1:1
Displays in 1:1 mode.
Off
On
STATUS
Status display*
4
☞ “On the Status Display” on page 11
L.METER
Audio level meter display
*
5
TIME CODE
Time code display
Off
On
SOURCE ID
☞ “SOURCE ID” in “INFORMATION” on page 17
*
6
COLOR OFF
Color off
Color
Monochrome
SCR CHECK
Screens check
*
7
I/P MODE
Change a mode according to a input picture.
*
8
MUTING
Muting on/off
Off
On
DIMMER
Change the intensity of the button lamps.
NORMAL
DARK
– – –
No function
—
—
*3
Selects which functions in “MARKER” are activated, non-“R-” items or “R-” items (
☞ “MARKER” on page 13 to 14).
*4
Displays the information shown when INPUT SELECT button of the current input is pressed (
☞ “On the Status Display” on page 11). While
controlling with the MAKE system, the information is displayed only at the moment of short-circuiting.
*5
While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When “LEVEL
METER ch” is set to “OFF,” the level meter is not displayed (“NO EFFECT” appears).
While controlling with the TRIGGER system, the pattern of the audio channel display is switched.
While controlling with the TRIGGER system, the pattern of the audio channel display is switched.
*6
While controlling with the MAKE system, the available set-up options will be the setting value currently selected in “SOURCE ID” (“ON” or
“AUTO” [short-circuiting]) and “OFF” (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the
SET-UP MENU (
SET-UP MENU (
☞ “SOURCE ID” in “INFORMATION” on page 17).
*7
While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While
controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (
☞ q on page 10).
*8
Must be controlled with the TRIGGER system. The mode changes in the order of “NORMAL” ¨ “CINEMA” ¨ “FIELD.” (This function cannot
be controlled with the MAKE system.)
You cannot assign the same function to different pin terminals.
The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.
The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.
•
•
•
DT-R24_17L4D_US_EN.indb 19
DT-R24_17L4D_US_EN.indb 19
2011/01/20 16:21:47
2011/01/20 16:21:47