Pioneer PRO-FHD1 사용자 설명서

En

Power Control provides convenient functions for power saving.

Energy Save

You may use one of the two Energy Save modes to save power 
consumption.

Press 

HOME MENU.

Select “Power Control” ( /  then 

ENTER (ENTER/DISP.)).

Select “Energy Save”  ( / ).

Select “Save 1” or ”Save 2” ( / ).

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

No Signal off

The Plasma Display will be automatically placed into the 
standby mode if no signal is received for 8 minutes.

Press 

HOME MENU.

Select “Power Control” ( /  then 

ENTER (ENTER/DISP.).

Select “No Signal off” ( / ).

Select ”Enable” ( / ).

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• INPUT1 to INPUT6 are enabled. INPUT1 and 4 are disabled, 

however, when they have “Signal Type” set to “PC.”

• Operation is disabled during display of the HOME MENU.

• A message will be displayed immediately before the Plasma 

Display enters standby mode.

Power Management 

The Plasma Display will be automatically placed into the 
standby mode when no signal is received.

Press 

HOME MENU.

Select “Power Control” ( /  then 

ENTER (ENTER/DISP.)).

Select “Power Management” ( / ).

Select “Enable” ( / ).

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• INPUT1 and INPUT4 only are enabled. However, when 

“Signal Type” is set to “AV”, they are disabled.

• Operation is disabled during display of the HOME MENU. 

Does not decrease the picture brightness.

Slightly lowers power consumption while 
slightly suppressing the brightness drop level.

Decreases the picture brightness and lowers 
power consumption.

Does not place the Plasma Display into the 
standby mode.

Places the Plasma Display into the standby 
mode if no signal is received for 8 minutes.

No power management 

If no input signal is detected for one minute or 
more, the unit automatically enters the standby 
mode. If a signal is subsequently detected, the 
unit automatically turns ON.