Pioneer PRO-FHD1 사용자 설명서

En

You can switch the vertical drive frequency for screen display 
between 75 Hz and 100 Hz. Choose the drive frequency that 
better suits your input signals.

Press 

HOME MENU.

Select “Option” ( /  then 

ENTER (ENTER/DISP.)).

Select “Drive Mode” ( / ). 

Select “75Hz” or “100Hz” ( / ).

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• This setting can be made for each input source separately.
• This setting is disabled when 480i, 480p, 1080i@60 Hz, 

720p@60 Hz, 1080p@24 Hz, 1080p@60 Hz, 4.43 NTSC 
signals, or NTSC signals are input. 

Adjust the horizontal and vertical positions of images on the 
Plasma Display.

Press 

HOME MENU.

Select “Option” ( /  then 

ENTER (ENTER/DISP.)).

Select “Position” ( /  then 

ENTER (ENTER/DISP.)).

Select “H/V Position Adjust” ( /  then 

ENTER (ENTER/

DISP.)).

Adjust the vertical position ( / ) or the horizontal 
position  ( / ).

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• To restore the factory defaults for all items, press  /  to 

select “Reset” in step 4, and then press 

ENTER (ENTER/

DISP.). A confirmation screen appears. Press  /  to select 
“Yes”, and then press 

ENTER (ENTER/DISP.).

• Adjustments are stored separately according to input 

source.

Use Auto Setup to automatically adjust the positions and clock 
of images coming from a personal computer.

Press 

PC AUTO SET UP on the remote control unit.

• Auto Setup starts.

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• When Auto Setup is finished, “Auto Setup completed.” 

appears.

• Even when “Auto Setup completed” appears, Auto Setup 

may have failed, depending on conditions.

• Auto Setup may fail with a PC image composed of similar 

patterns or monochrome. If not successful, change the PC 
image and try again.

• Be sure to connect the computer to the unit and switch it on 

before starting Auto Setup.

Usually you can easily adjust the positions and clock of images 
using Auto Setup. Use Manual Setup to optimise the positions 
and clock of images when necessary.

Press 

HOME MENU.

Select “Option” ( /  then 

ENTER (ENTER/DISP.)).

Select “Manual Setup” ( /  then 

ENTER (ENTER/DISP.)).

Select the item to be adjusted ( /  then 

ENTER (ENTER/

DISP.)).

Perform adjustment ( /  and  / ).

With “Clock” or “Phase” selected, you can change the 
parameter using  / .

Press 

HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit 

the menu.

• To restore the factory defaults for all the items, press  /  to 

select “Reset” in step 4, and then press 

ENTER (ENTER/DISP.). 

A confirmation screen appears. Press  /  to select “Yes”, and 
then press 

ENTER (ENTER/DISP.).