StarTech.com SV441DUSBI 사용자 설명서
Instruction Manual
39
OSD Operations
By hitting the left
<CTRL> key twice within two seconds, you may see
the ‘Hotkey Menu’ if it is enabled (an OSD option). Or, by hitting the left
<CTRL> key three times within two seconds, you will see a KVM MENU
screen showing a list of the computers with corresponding channel ad-
dresses, names and status.
<CTRL> key three times within two seconds, you will see a KVM MENU
screen showing a list of the computers with corresponding channel ad-
dresses, names and status.
The port number (or channel address) of the currently selected
•
computer is displayed in red in the top right of the screen.
computer is displayed in red in the top right of the screen.
The device name is green if the device has power and is ready for
•
selection or white if it has no power. The OSD menu automatically
updates the color when it is activated.
selection or white if it has no power. The OSD menu automatically
updates the color when it is activated.
Use the <UP> and <DOWN> arrow keys to highlight a computer and
•
the <ENTER> key to select it.
the <ENTER> key to select it.
Press <ESCAPE> to exit the OSD menu and remove the OSD menu
•
from the screen.
from the screen.
An eye mark on the right side of the screen indicates that the computer
•
has been selected to be monitored in Scan mode.You can switch this
mark on and off using function key <F2>.
has been selected to be monitored in Scan mode.You can switch this
mark on and off using function key <F2>.
Press <ESCAPE> to exit the OSD and to return to using the selected
•
computer. The computer name is shown on the screen.
computer. The computer name is shown on the screen.
OSD Function Keys
You can use the function keys when the OSD menu is active.
Function key <F1>
Edits the name of a managed computer or a Slave KVM. First, use the
<UP> and <DOWN> arrow keys to highlight a channel then press <F1>
followed by name entry. Each name can be up to 14 characters long. Valid
characters are A to Z, 0 to 9, and the dash character. Lowercase letters
are converted to uppercase. Press
Function key <F1>
Edits the name of a managed computer or a Slave KVM. First, use the
<UP> and <DOWN> arrow keys to highlight a channel then press <F1>
followed by name entry. Each name can be up to 14 characters long. Valid
characters are A to Z, 0 to 9, and the dash character. Lowercase letters
are converted to uppercase. Press
<BACKSPACE> to delete a letter one