StarTech.com SV441DUSBI 사용자 설명서

Instruction Manual

at a time. Nonvolatile memory stores all name entries until you change,
even if the unit is powered down.
Function key <F2>
Marks a computer to be scanned by switching the eye mark on or off.
First, use the

<UP> and <DOWN> arrow keys to highlight the device, then

press

<F2> to switch its eye mark on or off. If Scan Type is Ready PC +

Eye (see Function key <F4>), only the powered and eye-marked comput-
ers will be displayed in Scan mode.
Function key <F3>
Locks a device (a computer or a Slave) from unauthorized access. To
lock a device, use the

<UP> and <DOWN> arrow keys to highlight it,

then press

<F3>. Now, enter up to 4 characters (A to Z, 0 to 9, dash)

followed by

<ENTER> as new password. A Security enabled device is

marked with a lock beside its channel number. To permanently disable the
security function from a locked device, highlight it, press

<F3> then enter

the password. If you want to access the locked device temporarily, simply
highlight it and press

<ENTER>. Enter the password and you can access

the device. The device is automatically re-locked once you switch to an-
other device. During Scan mode, OSD skips the security-enabled device.
Function key <F4>
More functions are available by hitting

<F4>. A new screen pops up

displaying the functions described below. Most of them are marked with a
triangle indicating there are options to choose from. Using the

<UP> and

<DOWN> arrow keys, select the function and press <ENTER>.
Available options will be shown in the middle of the screen. To select an
option, use the

<UP> and <DOWN> arrow keys then press <ENTER> to

select the options.You can press

<ESCAPE> to exit at any time.

Auto Scan
In this mode, the KVM automatically switches from one powered com-
puter to the next sequentially in a fixed interval. During Auto Scan mode,
the OSD displays the name of the selected computer. When Auto Scan
detects any keyboard or mouse activity, it suspends the scanning until ac-
tivity stops; it then resumes with the next computer in sequence. To abort
Auto Scan mode, press the left

<CTRL> twice. Scan Type and Scan Rate

set the scan pattern. Scan Type (

<F4>: More\Scan Type) determines if