Dialogic M7324 사용자 설명서

The MWI feature access code must be programmed in specific personal keys 
in the Mitel 430 and Mitel 420 emulations for the board to function 
successfully.  

There are specific switch programming requirements that apply if using a 
Dialogic

® 

PBX Integration Board with a Mitel Superswitch. Pay attention to 

set these features exactly (and assigned to the right keys) so that the PBX 
Integration Board and the Dialogic

® 

Unified API can function correctly.  

The PBX uses Class of Service (COS) to determine which features are 
available to an extension. The features available to an extension are shown in 
the telephone set’s LCD Features display. Any feature not in the COS will not 
be displayed. 

The following subsections describe PBX-side programming, followed by 
Phone-side programming. 

1.  Under main menu option 03, COS Define, enable option numbers 232, 

Message Waiting Setup – Lamp and 259, Message Sending.  

2.  Under main menu option 09, Stations/Superset Assignments, scroll 

down to select the desired station(s), arrow over to the COS column and 
enter the desired COS number (based on the COS setup above). 

3.  Press <ESC>0 to enter the change and <ESC>6 to return to the main 

menu. 

1.  Create a COS from the main menu option System Forms | Class of 

Service Options Assignments. 

2.  Press <ESC>2 to edit this form and enter the COS number desired for 

MWI setup. 

3.  Press <ESC>1 to recall the select COS number to the screen. 

4.  Set the Message Waiting option to YES.