Dialogic M7324 사용자 설명서

5.  Press <ESC>4 to commit to the changes. 

6.  Assign a COS to the desired station(s) from main menu option System 

Forms | Form Menus | Class of Service Options Assignments. 

7.  Select Dependents | Station Service Assignments and edit this form. 

8.  For each station, enter the desired COS number (based on the COS setup 

above). 

9.  Press <ESC>4 to save the changes. 

If you are using a Mitel SX-50 and wish to use the set Message Waiting 
Indicators (MWI) feature, the Dialogic

®

 PBX Integration Board must enable 

Auxiliary Attendant capabilities, and a line key must be set to act as the 
Attendant Console MWI. To configure MWI on a Mitel Superswitch: 

•  Enable Auxiliary Attendant capabilities. 
•  Configure Personal Key 02 (see 

) to act as an Attendant Console 

Message Waiting Indicator key. 

See the Mitel manuals for more information on programming a Superswitch. 

1.  From an attendant console, enter Programming Mode. 

2.  Enter the Command Number corresponding to the COS to which you 

want to add Auxiliary Attendant capabilities. Use commands 121 through 
129 for COS 1 through COS 9. For example, if you want to change COS 
9, use Command Number 129. 

3.  Set register 7, field “d” (Auxiliary Attendant Position) to 1 (enable 

Auxiliary Attendant Position) for the desired COS (1 - 9). The illustration 
below shows the Auxiliary Attendant feature enabled on COS 9.