Ampro Corporation 420 사용자 설명서

CoreModule 420

QuickStart Guide

9

18)  Enter BIOS Setup Utility

•

  

Press the <Del> key during POST, or S to enter BIOS Setup.

•

  

Use BIOS Setup during the initial boot to set the desired options

(time and date, alter the boot drive for the floppy drive, CD-
ROM, or hard disk drive, etc.).

• 

 

Refer to the next step to alter the boot sequence, while in Setup.

19)  Alter Boot Order, only if
        needed.

•  If you need to alter the boot sequence to select a bootable device,

perform the items listed in this step.

a) Select the BIOS and Hardware

Settings menu as shown in the
figure to the right and press
Enter.

The sub-steps listed here
show you how to change the
Boot Sequence while in the
BIOS Setup Utility.

b) Select the first drive in the Boot

Order as highlighted to the right.

This example assumes Drive A
is a 3 ½” floppy drive, Drive C is
an IDE HDD, and the 3

rd

 drive is

an IDE CD-ROM.

The CD-ROM or
CompactFlash (CF) must
be listed in Drive
Assignment and the Boot
Order to be recognized by
the BIOS.  CF can only
be listed as C or D drive
in the Boot Order.

b

oot

se

q

0

3a

c) Move the CD-ROM up in the

Boot Order.

d) Exit and Save changes.

•

  

Use the Arrow keys and PU/PD keys to move the CD-ROM

up in the Boot Order.

•  If you want to keep the floppy drive and hard drive in the boot

order, you will need to make changes to the other Boot Order
devices.

For example, change Boot 3

rd

 to Drive A, to keep it in the

boot sequence.

20)  If using a CompactFlash

•  If you did not receive a CompactFlash card from Ampro, go to

the next step, Step 21.

•  If you received a CompactFlash card from Ampro with your

system, use the compact flash card to boot the system.

•  If you have to change the boot order to do so, refer to Step 19.
•  If you do not intend to install the OS or additional drivers onto

the hard disk drive, skip Step 21.  See jumper setting next page.