Premier Mounts CDM-600 사용자 설명서

다운로드
페이지 250
CDM-600 Satellite Modem 
Revision 7 
Preface 
MN/CDM600.IOM 
xiii 
Electrical Safety 
The CDM-600 Modem has been shown to comply with the following safety standard: 
 
•  EN 60950: Safety of Information Technology Equipment, including 
electrical business machines. 
 
The equipment is rated for operation over the range 100 - 240 volts AC. It has a 
maximum power consumption of 40 watts, and draws a maximum of 400 mA. 
 
IMPORTANT
 
 
The user should observe the following instructions: 
Fuses 
The CDM-600 is fitted with two fuses - one each for line and neutral connections. These 
are contained within the body of the IEC power inlet connector, behind a small plastic 
flap. 
 
•  For 230 volt AC operation, use T0.75A, 20mm fuses. 
•  For 115 volt AC operation, use T1.25A fuses, 20mm fuses. 
 
FOR CONTINUED OPERATOR SAFETY, ALWAYS REPLACE THE FUSES 
WITH THE CORRECT TYPE AND RATING. 
Environmental 
The CDM-600 must not be operated in an environment where the unit is exposed to 
extremes of temperature outside the ambient range 0 to 50°C, precipitation, condensation, 
or humid atmospheres above 95% RH, altitudes (un-pressurised) greater than 2000 
metres, excessive dust or vibration, flammable gases, corrosive or explosive atmospheres. 
 
Operation in vehicles or other transportable installations that are equipped to provide a 
stable environment is permitted. If such vehicles do not provide a stable environment, 
safety of the equipment to EN60950 may not be guaranteed.