Premier Mounts CDM-600 사용자 설명서
CDM-600 Satellite Modem
Revision 7
Preface
MN/CDM600.IOM
xv
EMC (Electromagnetic Compatibility)
In accordance with European Directive 89/336/EEC, the CDM-600 Modem has been
shown, by independent testing, to comply with the following standards:
Emissions:
shown, by independent testing, to comply with the following standards:
Emissions:
EN 55022 Class B - Limits and methods of measurement of radio
interference characteristics of Information Technology Equipment.
interference characteristics of Information Technology Equipment.
(Also tested to FCC Part 15 Class B)
Immunity:
EN 50082 Part 1 - Generic immunity standard, Part 1: Domestic,
commercial and light industrial environment.
commercial and light industrial environment.
Additionally, the CDM-600 has been shown to comply with the following standards:
EN 61000-3-2
Harmonic Currents Emission
EN 61000-3-3
Voltage Fluctuations and Flicker
EN 61000-4-2
ESD Immunity
EN 61000-4-4
EFT Burst Immunity
EN 61000-4-5
Surge Immunity
EN 61000-4-6
RF Conducted Immunity
EN 61000-4-8
Power frequency Magnetic Field Immunity
EN 61000-4-9
Pulse Magnetic Field Immunity
EN 61000-4-11
Voltage Dips, Interruptions, and Variations Immunity
EN 61000-4-13
Immunity to Harmonics
IMPORTANT
In order that the Modem continues to comply with these standards,
observe the following instructions:
observe the following instructions:
• Connections to the transmit and receive IF ports (BNC female connectors) should
be made using a good quality coaxial cable - for example RG58/U (50
Ω or
RG59/U (75
Ω).
• All 'D' type connectors attached to the rear panel must have back-shells that
provide continuous metallic shielding. Cable with a continuous outer shield
(either foil or braid, or both) must be used, and the shield must be bonded to the
back-shell.
(either foil or braid, or both) must be used, and the shield must be bonded to the
back-shell.
• The equipment must be operated with its cover on at all times. If it becomes
necessary to remove the cover, the user should ensure that the cover is correctly
re-fitted before normal operation commences.
re-fitted before normal operation commences.