Netgear FVS318N 사용자 설명서

다운로드
페이지 425
Wireless Configuration and Security
107
 ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
(NIC) through an antenna. Typically, an individual in-building wireless access point provides a 
maximum connectivity area of about a 300-foot radius. The wireless VPN firewall can support 
a small group of wireless users—typically 10 to 32 users.
Configure the wireless features according to the order of the following sections:
1. 
2. 
3. 
(Optional) 
4. 
(Optional) 
Wireless Equipment Placement and Range Guidelines
The range of your wireless connection can vary significantly based on the location of the 
wireless VPN firewall. The latency, data throughput performance, and notebook power 
consumption of wireless adapters also vary depending on your configuration choices.
Note:  
Failure to follow these guidelines can result in significant performance 
degradation or inability to wirelessly connect to the wireless VPN firewall. 
For complete performance specifications, see the Data Sheet at 
.
For best results, place your wireless VPN firewall according to the following general 
guidelines:
Near the center of the area in which your wireless devices will operate.
In an elevated location such as a high shelf where the wirelessly connected devices have 
line-of-sight access (even if through walls).
Away from sources of interference, such as computers, microwaves ovens, and 2.4-GHz 
cordless phones.
Away from large metal surfaces or water.
Placing the antennas in a vertical position provides the best side-to-side coverage. 
Placing the antennas in a horizontal position provides the best up-and-down coverage.
If you are using multiple wireless access points such as the wireless VPN firewall, it is 
better if access points use different radio frequency channels to reduce interference. The 
recommended channel space between adjacent access points is five channels (for 
example, use channels 1 and 6, or 6 and 11, or 1 and 11).
The time it takes to establish a wireless connection can vary depending on both your 
security settings and placement. WEP connections can take slightly longer to establish. 
Also, WEP encryption can consume more battery power on a notebook computer.