Netgear FVS318N 사용자 설명서
Wireless Configuration and Security
108
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure the Basic Radio Settings
The radio settings apply to all wireless profiles on the wireless VPN firewall. The default
wireless mode is 802.11ng. You can change the wireless mode, country, and many other
radio settings on the Radio Settings screen (described in this section) and on the Advanced
Wireless screen (see
wireless mode is 802.11ng. You can change the wireless mode, country, and many other
radio settings on the Radio Settings screen (described in this section) and on the Advanced
Wireless screen (see
on page 125). The default radio
settings should work well for most configurations.
To configure the basic radio settings:
1.
Select Network Configuration > Wireless Settings > Radio Settings. The Radio
Settings screen displays:
Settings screen displays:
Figure 54.
2.
Specify the remaining wireless settings as explained the following table:
Table 27. Radio Settings screen settings
Setting
Descriptions
Region
This is a preconfigured field that you cannot change.
Country
Specify the country by making a selection from the drop-down list.
Operating Frequency
This is a nonconfigurable field. The radio’s operating frequency is fixed at
2.4 GHz.
2.4 GHz.