StarTech.com CABCONS1716I 사용자 설명서

Instruction Manual

51

8N1: Eight bits, no parity, one stop bit (default and most common)
7N1/701/7E1/7M1/7S1: Seven bits, (none/odd/even/mark/space) parity, one stop bit
8N1/801/8E1/8M1/8S1: Eight bits, (none/odd/even/mark/space) parity, one stop bit
8N2: Eight bits, no parity, two stop bits
Force DCD: Forces the Carrier Detect signal to be active at all times. Normally, 

DCD becomes active when a new user connects and is dropped when the last user 

disconnects (a response that is similar to many modems). When active, the device will 

logout and reset itself if the carrier signal is lost, increasing security. 
NOTE: This may not work with all devices and could impair proper operation in some 

circumstances. The default setting is off.
Console Log: Clicking this link will open a separate Web page that will display the 

last 200 characters committed to that device’s console log. Note that existing data is 

overwritten automatically when the 200 character limit is reached.
You can simultaneously make any required changes on this menu, before applying 

your changes. Once complete, click Commit changes to apply the new settings. Click 

Refresh at any time to see an updated list of attached R-Port modules.

In most cases, configuring the CABCONS1716I to the same settings as the R-Port 

devices you are connecting should allow the devices to work with a minimum amount 

of configuration. However, you can also change the default settings on each R-Port 

device to fit your preferences and the needs of your application.
If you click the Connect… button next to the device you want to configure, two 

new windows will appear. The smaller of the two is a login screen; the other is an 

SSH terminal window. Click the login window and sign in as admin (using the same 

password as the Web interface) to activate the terminal window. You will see a 

welcome banner similar to the following:
    Baud rate: 115200 bps, 8N1
    Connected to #1: (none)... (Press Ctrl-Shift-_for menu).