StarTech.com CABCONS1716I 사용자 설명서

Instruction Manual

52

You are now connected to the R-Port module in a live terminal session. Commands 

you type will be echoed on the terminal screen. The module also offers a simple menu 

system that allows you to change  configuration settings (similar to the function of the 

menus in a terminal software package). Press [Ctrl] - [Shift] – [_] (underscore) on the 

keyboard to access the menu. It will be similar to the following:
    RS-232 Menu (#1: (none), 115200 bps, 8N1)
    Q – Disconnect
    # - Send break
    H – Hangup line (drop DCD)
    E – Send Ctrl-Shift-_
    L – Low log entries (line buffer)
    1 – Show last 10 log entries
    other – Return to connection
    Press key ->
To execute the desired command, press the corresponding key on the keyboard.  You 

can also execute the command and avoid the menu by pressing the [Ctrl] – [Shift] – 

[_] key combination quickly and pressing the letter of the command. To quit the menu, 

press [Q] on the keyboard when the menu is active. These commands are not sent to 

the device you are managing and relate to the RPORT module itself.

You can also use a standard SSH client to access the R-Port options if you wish to 

avoid using the Java-based SSH client in the Web interface. Simply use your SSH 

client (several freeware packages are available for download, along with commercial 

applications) and connect to the IP address of the CABCONS1716I using port  

22 (default).
Log in to the SSH session as admin using the same password as the Web interface. At 

the command prompt type connect x (where x is the number of the R-Port devices you 

wish to manage). Alternatively, you can enter the command connect -l to see a list of 

active devices.