Avaya Comcode 700220627 사용자 설명서

To copy the customer’s data from the CVUE backup tape onto the system:

1. Verify that the customer’s “CVUE Extract” tape is write-protected and is inserted in the 

correct tape drive. Remove tapes from any other tape drives connected to the system.

2. Load the CVUE Upgrade Tool CD.

The File Manager window will open. Move and click the cursor in an XTERM window.

3. After about 15 seconds, enter: 

4. Do one of the following:

●

If running the command locally at the console, enter:

●

Optionally, if running the command remotely on a dial-up line, enter:

!

If the dial-up modem line drops after starting this command with 

, 

reconnect to the system, but DO NOT rerun this command. Use 

 to view the progress of the command. When finished viewing 

the nohup.out file, press Del to break out of the command.

During the copy process, the status lamp on the tape drive flashes, and the system 
displays a list of files being copied:

When the copy process is completed, the system displays the following message:

5. Continue with 

.

!

Do not open any new windows on the local console. Do not eject the CD.

Reading admin data from /dev/rmt/

X

.

.

The cvue_copy process is complete...Tue Jan 16 12:36:15 EST 2001

#