Avaya Comcode 700220627 사용자 설명서

The activate process can take from as little as a few minutes to as much as 1 to 2 hours to 
complete. The amount of time depends on the number of customer options, the number 
and size of the disk drives, the number of ACDs, and so on.

To activate the customer’s software options:

1. Enter: 

2. Do one of the following:

●

If running the command locally at the console, enter:

●

Optionally, if running the command remotely on a dial-up line, enter:

!

If the dial-up modem line drops after starting this command with 

, 

reconnect to the system, but DO NOT rerun this command. Use 

 to view the progress of the command. When finished viewing 

the nohup.out file, press Del to break out of the command.

For On Site Personnel: If the upgrade is being supported by remote personnel (for 
example, provisioning), use the following command from the local console during 
the copy and activate process to view the CVUE log file and track the progress of 
the upgrade:

When finished viewing the /var/log/cvuelog file, press Del to break out of the 
command.

3. One of the following occurs:

●

If the CVUE copy was not done, the system displays the following message and you 
must run CVUE copy again:

cvue_copy not successful, run the cvue_copy again