Cisco Systems NPE-225 사용자 설명서

The Cisco 7200 series routers ship with a roll-over cable. Connection to a terminal or a modem requires 
an RJ-45-to-DB-25 adapter, and possibly a DB-25-to-DB9 adapter. Refer to 

 for the cable and 

adapter configurations that can be used to connect terminals and modems to the Cisco 7200 series 
routers.

The cable and auxiliary ports are configured as asynchronous serial ports. 

 shows the RJ-45 

console and auxiliary port connections.

A cable and adapter kit is available from Cisco (Product Number ACS-2500ASYN=). 

 

describes the cable and adapter configurations that can be used to connect terminals and modems to the 
console or the auxiliary port.

The NPE-G1 console port

 

supports Data Carrier Detect (DCD). 

 lists the RJ-45 console port 

signals for the NPE-G1.

Console or auxiliary

Roll-over

FDTE

1

1.

The FDTE RJ-45-to-DB-25 adapter is labeled “Terminal”. 

Terminal

Console or auxiliary

Straight

FDCE

Terminal 

Auxiliary or console

Roll-over

MMOD

2

2.

The MMOD RJ-45-to-DB-25 adapter is labeled “Modem”.

Modem

Console port

Cable to console terminal or DTE

Auxiliary port

Cable to modem or DCE

RJ-45 connectors

CONSOLE

AUX

C P U

R E S ET

C O M PACT F

L A S H

POWER

ON

S L OT

A C T I V E

66777