Cisco Systems NPE-225 사용자 설명서

This chapter describes the NPE-G2 and contains the following sections:

You must copy and save your running configuration file to a CompactFlash Disk, PC Card, or TFTP 
server before you install the NPE-G2. For instructions on copying and saving your configuration file, see 
the 

 in 

 

 

 
For general preparation for installation instructions, see 

 For 

installation and configuration instructions specific to the NPE-G2, see 

The NPE-G2 is supported on the Cisco 7200 VXR routers and Cisco uBR7200 series routers. For the 
Cisco 7200 VXR routers, order Part Number NPE-G2 or NPE-G2=. For the Cisco uBR7200 series 
routers, order Part Number UBR7200-NPE-G2 or UBR7200-NPE-G2=. 

Unless otherwise indicated, all references to NPE-G2 in this document also refer to UBR7200-NPE-G2.