Cisco Systems 57712 사용자 설명서

Managing Server Power

Powering On the Server

If the server was powered off other than through the CIMC, the server will not become active immediately
when powered on. In this case, the server will enter standby mode until the CIMC completes initialization.

Note

If any firmware or BIOS updates are in progress, do not change the server power until those tasks are
complete.

Important

Before You Begin

You must log in with user or admin privileges to perform this task.

Procedure

Purpose

Command or Action

Enters chassis command mode.

Server# scope chassis

Step 1

Turns on the server.

Server /chassis # power on

Step 2

This example turns on the server:

Server#

scope chassis

Server /chassis #

power on

This operation will change the server's power state.
Continue?[y|N]y

Server /chassis #

show

Power Serial Number Product Name

UUID

----- ------------- ------------- ------------------------------------
on

Not Specified Not Specified 208F0100020F000000BEA80000DEAD00

Powering Off the Server

If any firmware or BIOS updates are in progress, do not power off the server until those tasks are complete.

Important

Before You Begin

You must log in with user or admin privileges to perform this task.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01

Managing the Server

Managing Server Power