Toshiba ASD-G9ETH 사용자 설명서

 

  

89

ICC 

 

 
5)  Configure the MSG instruction. 

a)  Set the “Read/Write” field to “Read”, “Target Device” field to “PLC5”, 

“Local/Remote” field to “Local”, and “Control Block” to “N20:0”. 

b)  Upon hitting the <ENTER> key while in the “Control Block” entry box, 

the MSG Properties dialog box should appear (or it can be opened by 
clicking on the “Setup Screen” button at the bottom of the MSG 
instruction).  Refer to Figure 92.