Panasonic WV-CU650 사용자 설명서

35

From this system controller, you can control digital disk
recorders supporting PS·Data. You will control a recorder in
the status in which a recorder has been selected.

■ Manual Recording

1. To start the recording, press the REC button.

Recording will be started.

2. To stop the recording, press the REC button again for

two seconds. 

Refer to the operating instructions of recorder for the
available recording modes and total recording time.

■ Playback

1. Select a desired recorder.

Refer to p. 31 Recorder Selection.

2. Select a camera whose picture you wish to play back.

Refer to p. 32 Camera Selection.
When camera selection is not necessary, skip to Step 3.

3. To start playback, press the PLAY/PAUSE button.

The playback will be started.
Note: The playback start point differs depending on

recorders. (Refer to the operating instructions of
recorder.)

Pause: Refer to p. 9 @5 Play/Pause button.
Single frame skip (Forward or backward field

advance): Refer to p. 9 @7 JogDial.

rewind): Refer to p.9 @7 Shuttle ring.

Hold playback speed: Refer to p. 10 @8 Shuttle hold

button.

Skip (WJ-HD300 and WJ-HD500 Series): Refer to p. 9

@7 JogDial.

only): Refer to p. 9 !5 Go to last button.

Multiscreen display: Refer to p. 9 !7 Multiscreen

selection button.

Marking (WJ-HD300 Series only): Refer to p. 9 !85

Mark button.

4. To stop playback, press the STOP button. 

The playback will be stopped.

■ Search Playback

Recorders have search playback functions based on
recording times or recording events. When searching play-
back images, you can activate these functions from this
system controller.

• WJ-HD100 Series does not support search playback.
• WJ-HD300 Ver. 1.2 or later / WJ-HD200 Ver. 1.24 or

later / WJ-HD220 supports search playback.

● How to Display Search Lists

1. Press the SEARCH/T&D SEARCH button. “Search

Mode” menu will appear on the LCD, and a search list
(date-and-time entry form, record list, or recording
event list, etc.) will be displayed on an active monitor.

• Every pressing the SEARCH/T&D SEARCH button

can change search list display. (For example,
Record list 

→ Thumbnail Display → Record List …)

• The search list firstly displayed differs depending

on recorders.

2. Perform operations while watching the active monitor.

Note: The operation details differ depending on

recorders. Refer to pp. 36 to 38.

Changes the search list display. (For example,
Record list 

↔ Thumbnail Display ↔ Record List …)

JogDial clockwise or counterclockwise: Changes the

selected parameter.

Numeric buttons: Enters numeric parameters.

Search Mode    HD300

Thumb      Text Copy

F1

F2

F3

F4

Example: WJ-HD300 Series