Netgear WG302v2 사용자 설명서

3-2

Management and Information

To access the Remote Management screen:

1. Enter the LAN address of the WG302v2 into the address field of your browser. 

2. After you log in, click Remote Management under Management on the main menu

.

3. Enter the Remote Management information.

•

Secure Shell (SSH): If set to Enable, the Wireless Access Point will only allow remote 
access via Secure Shell and Secure Telnet. The default is Enable.

•

SNMP: Enable SNMP to allow the SNMP network management software, such as HP 
OpenView, to manage the wireless access point via SNMPv1/v2 protocol. 

•

Public Community Name: The community string to allow the SNMP manager to read the 
wireless access point's MIB objects. The default is public.

•

Private Community Name: The community string to allow the SNMP manager to read 
and write the wireless access point's MIB objects. The default is private.

•

Community Name for Traps: The community string associated with the IP address to 
Receive Traps. There is no default value.

•

IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent 
from the wireless access point. The default is 0.0.0.0.

4. Click Apply to save your settings.