Netgear WG302v2 사용자 설명서
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
C-12
Command Line Reference
v1.0, May 2006
RADIUS Server Settings
The commands in
correspond to the RADIUS Server Settings page on the Web UI.
Set Network Authentication to
WPA and WPA2 with RADIUS
WPA and WPA2 with RADIUS
set interface wlan0 security wpa-enterprise
set bss wlan0bssvap0 wpa-allowed on
set bss wlan0bssvap0 wpa2-allowed on
Enable Wireless Client Security
Separation
Separation
set radio wlan0 station-isolation on
Disable Wireless Client Security
Separation
Separation
set radio wlan0 station-isolation off
Set the VLAN ID for the Security
Profile
Profile
set vap vap0 with radio wlan0 vlan-id <1-4096>
Table C-10 RADIUS Server Settings
Task
Command
Set the IP Address of the
Primary Authentication Server
set radius-client
primary-authentication-server <ip_address>
Set the Port Number of the
Primary Authentication Server
set radius-client
primary-authentication-port <port_number>
Set the Shared Secret for the
Primary Authentication Server
Primary Authentication Server
set radius-client
primary-authentication-key <value>
Set the IP Address of the
Secondary Authentication
Server
Server
set radius-client
secondary-authentication-server <ip_address>
Set the Port Number of the
Secondary Authentication
Server
Server
set radius-client
secondary-authentication-port <port_number>
Set the Shared Secret for the
Secondary Authentication
Server
Secondary Authentication
Server
set radius-client
secondary-authentication-key <value>
Set the IP Address of the Pri-
mary Accounting Server
mary Accounting Server
set radius-client
primary-accounting-server <ip_address>
Table C-9 Security Profile Settings (continued)
Task
Command