Netgear WG302v2 사용자 설명서
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
C-14
Command Line Reference
v1.0, May 2006
Viewing and Configuring Management Settings
The commands in
correspond to the pages on the Web UI under the Management
heading. This section includes commands for the following features:
•
Change Password
•
Remote Management
•
Upgrade Firmware
•
Backup and Restore
•
Reboot the System.
Table C-12 AP Management
Task
Command
Set a password for admin access
to the AP.
to the AP.
set system password <password>
Enable Remote CLI Access
set ssh status up
Disable Remote CLI Access
set ssh status down
Enable SNMP
set snmp status up
Disable SNMP
set snmp status down
Set a Public Community name
set snmp ro-community <string>
Set a Private Community name
set snmp rw-community <string>
Set an IP address to receive
SNMP traps
SNMP traps
set traphost host <ip_address>
Upgrade the firmware (requires a
reboot)
reboot)
firmware-upgrade <url>
Example:
firmware-upgrade tftp://1.2.3.4/upgrade.tar
firmware-upgrade file://1.2.3.4/tmp/upgrade.tar
Backup the configuration file
config download <url>
Example:
config download tftp://1.2.3.4/
defaultcfg.xml
Restore the configuration file
config upload <url>
Example
:
config upload tftp://1.2.3.4/defaultcfg.xml
Revert to factory default settings
factory-reset
Reboot the system
reboot