Netgear XAV1601 사용자 설명서

Set the Powerline Encryption Key

Powerline devices that share the same Powerline network have to use the same encryption 
key. The factory default encryption key is HomePlugAV.

In locations such as apartment complexes or office buildings, others might share the same 
electrical power lines that you use for your Powerline network. To protect your Powerline 
network from unwanted access, you can customize the encryption key for your Powerline 
devices. Make sure that you set up exactly the same encryption key for all of your Powerline 
devices so that they can communicate with each other.

You use the Security screen in the Powerline Utility to set encryption keys. If you customize 
the encryption key and then forget what it is, you can return your Powerline devices to the 
factory default Powerline encryption key, HomePlugAV.

Click the Powerline device icon or the Security icon 

 on the Powerline Utility main 

screen.

The top section of the Security screen shows information about each device that the 
Powerline Utility detects:

Device Name. Lists the Powerline devices detected on the network after the utility 

completes a scan for devices. The device name is initially set by the utility, but you 
can change it to a descriptive name, such as Office or Master Bedroom.

Model. Identifies the model number of the Powerline adapter.

MAC Address. Shows the MAC address for the Powerline device, which is also on 

the product label, but may not be visible when the device is plugged in.

Device Password. To change settings for a remote Powerline device, you have to 

enter its password. The device password is located on the product label.