Netgear XAV1601 사용자 설명서
Chapter 1. Installation and Basic Configuration
|
7
XAV1601 Powerline AV+ 200 Nano User Manual
Installing Your Powerline XAV1601 Nano
Prepare for Installation:
1.
Before you begin, verify the following:
•
Your Ethernet network is set up.
•
An Ethernet port is available on your router.
•
Your Internet connection is working.
•
An Ethernet port is available on each computer that will use a Powerline XAV1601
Nano and is configured to work on your network. Usually, the default configuration
settings (TCP/IP and DHCP) are fine.
settings (TCP/IP and DHCP) are fine.
2.
Familiarize yourself with the Powerline XAV1601 Nano.
The front panel has three lights: Power, Powerline, and Ethernet. The side panel has a
Security button, and a Reset button. The Ethernet port is located on the bottom of the
adapter. See
Security button, and a Reset button. The Ethernet port is located on the bottom of the
adapter. See
5.
3.
Plan the location of your Powerline devices:
•
Use an electrical outlet that is not controlled by a wall
switch to avoid someone unknowingly turning off the
power to the outlet.
power to the outlet.
•
Do not connect the Powerline XAV1601 Nano to a
power strip, extension cord, or surge protector as this
might prevent it from working correctly, or reduce the
network performance.
might prevent it from working correctly, or reduce the
network performance.
•
Avoid using the Powerline XAV1601 Nano in an
electrical outlet that is located near an appliance that
uses a lot of power, such as a washer or dryer, or a
refrigerator. This could potentially prevent the adapter
from working correctly, or reduce network
performance.
uses a lot of power, such as a washer or dryer, or a
refrigerator. This could potentially prevent the adapter
from working correctly, or reduce network
performance.