EIKI MD13NET 사용자 설명서

Installation

When you use the projector through the network, the IP address of the pro-
jector must be the same IP network number of the existing network. Also it

is required to use the same IP network number of the computer to set up the projec-
tor. In the network included with the gateway (router), it must be used with the IP
network number specified by the gateway (router).

Configure the computer's network by following steps:

This example explains how to set the following
network address.

Select the 

menu from [Start] -

[Setting] menu.

Double click the 

icon on the control

panel window.

Select the 

*

1

item on the “Current

Network Component” column on the
“Network configuration” tab on the
“Network” dialog window, and then press the

button.

Click the 

tab, and then select the

. Enter the IP Address*

2

and Subnet Mask.

Click the 

tab and enter the Gateway

Address then press the 

button. Please

make sure that the entered gateway address
appears on the “Installed Gateway” column.

✐ This setting is not needed if the network does not

provide the gateway (router).

Click the 

button, the setting window will

be closed and restart the computer.

IP Address

: 192.168.0.5

Subnet Mask

: 255.255.255.0

Gateway Address : 192.168.100.1