EIKI MD13NET 사용자 설명서

Installation

This example explains how to set the following network address.

Select the 

menu from the

[Start] menu. Click the 

and then click the 

on

the control panel.

Click the 

icon with

right button of the mouse and then select the

menu. The right window will

appear on the screen.

Select the 

tab on the “Local Area

Connection Properties” dialog window.
Select the 

*1 

and

then press the 

button.

On the “Internet Protocol (TCP/IP)
Properties” dialog window, select the 

button and then

enter the IP address*

2

and Subnet mask.

Enter the Default gateway address.

✐ This setting is not needed if the network does

not provide the gateway (router).

Click the 

button, the setting window will

be closed.

IP Address

: 192.168.0.5

Subnet Mask

: 255.255.255.0

Gateway Address : 192.168.100.1

*1 Select the “TCP/IP” item of the LAN card you use. If the “TCP/IP” item is not listed in the

column, you need to install the TCP/IP protocol. For further information refer to the user's
manual of your computer.

*2 If the network already has the TCP/IP protocol set, enter with the same IP network number

for the IP address and Subnet mask.

*3 There are some ways to set up the network depending on your computer’s environment.