Printronix Network Interface Card 사용자 설명서
Printing From AIX
147
Printing From AIX
Version 4.0 and higher of AIX
®
offers LPR/LPD support for network
printing. This means, to set up a new printer under this operating
system, you only need to define these two parameters:
system, you only need to define these two parameters:
1.
NIC IP address. The IP address or host name of the print
server to which you want to print.
server to which you want to print.
2.
NIC destination/queue. A pre-defined name on the print
server telling the device to which I/O port to send the jobs. Most
likely, you will use d1prn for the PRN.
server telling the device to which I/O port to send the jobs. Most
likely, you will use d1prn for the PRN.
Printing With FTP
Print jobs can also be sent to the NIC using the File Transfer
Protocol (FTP). To do this:
Protocol (FTP). To do this:
1.
On your network station, change to the directory containing the
file you want to print.
file you want to print.
2.
Open an FTP session with the NIC.
Syntax:
ftp NICIPaddress
3.
Log in as root.
4.
At the password prompt, press ENTER (since there is no
default password).
default password).
5.
Change to the dest directory.
Syntax:
cd dest
6.
List the contents of this directory using the dir command and
determine which destination/queue you would like to send the
print job through. Most likely, you will select d1prn for the PRN
port.
determine which destination/queue you would like to send the
print job through. Most likely, you will select d1prn for the PRN
port.
7.
Change to this destination directory.
Example:
cd d1prn