Motorola MCF5281 사용자 설명서

MOTOROLA

Chapter 12.  Chip Select Module  

12-3

Each chip select has a dedicated set of registers for configuration and control.

• Chip select address registers (CSARn) control the base address of the chip select. 

• Chip select mask registers (CSMRn) provide 16-bit address masking and access 

• Chip select control registers (CSCRn) provide port size and burst capability 

indication, wait-state generation, and automatic acknowledge generation features. 
See Section 12.4.1.3.

CS0 is a global chip select after reset and provides relocatable boot ROM capability.

When a bus cycle is initiated, the MCF5282 first compares its address with the base address
and mask configurations programmed for chip selects 0–6 (configured in CSCR0–CSCR6)
and DRAM blocks 0 and 1 (configured in DACR0 and DACR1). If the driven address
matches a programmed chip select or DRAM block, the appropriate chip select is asserted
or the DRAM block is selected using the specifications programmed in the respective
configuration register. Otherwise, the following occurs: 

• If the address and attributes do not match in CSAR or DACR, the MCF5282 runs an 

external burst-inhibited bus cycle with a default of external termination on a 32-bit 
port.

• Should an address and attribute match in multiple CSCRs, the matching chip select 

signals are driven; however, the chip select signals are driven during an external 
burst-inhibited bus cycle with external termination on a 32-bit port. 

• If the address and attribute match both DACRs or a DACR and a CSAR, the 

operation is undefined. 

Table 12-3 shows the type of access as a function of match in the CSARs and DACRs.