Cisco Systems OL-7396-01 사용자 설명서
C H A P T E R
15-1
ATM Switch Router Software Configuration Guide
OL-7396-01
15
Configuring ATM Accounting, RMON, and SNMP
This chapter describes the ATM accounting, Remote Monitoring (RMON), and SNMP features used
with the ATM switch router.
with the ATM switch router.
Note
This chapter provides advanced configuration instructions for the Catalyst 8540 MSR,
Catalyst 8510 MSR, and LightStream 1010 ATM switch routers. For complete descriptions of the
commands mentioned in this chapter, refer to the ATM Switch Router Command Reference publication.
Catalyst 8510 MSR, and LightStream 1010 ATM switch routers. For complete descriptions of the
commands mentioned in this chapter, refer to the ATM Switch Router Command Reference publication.
This chapter includes the following sections:
•
•
•
Note
The ATM accounting and ATM RMON features both require a minimum of 32 MB of dynamic random
access memory (DRAM) installed on the multiservice route processor. If you want to run both ATM
accounting and ATM RMON features together, you must have 64 MB of DRAM.
access memory (DRAM) installed on the multiservice route processor. If you want to run both ATM
accounting and ATM RMON features together, you must have 64 MB of DRAM.
Configuring ATM Accounting
The following sections describe the process used to enable and configure the ATM accounting feature
on the ATM switch router:
on the ATM switch router:
•
•
•
•
•
•
•
•
•