Netgear WNR200v4 사용자 설명서

. Securely insert that cable into a 

LAN port on the router such as LAN port 4.

Your network cables are connected, and you are ready to start your network. It is important 
that you start your network in the correct sequence:

First, power on the modem.

After the modem finishes starting up, power on the router. Turn on the router by pressing 

the Power On/Off button on the back.

Verify that your router is cabled correctly by checking the router LEDs:

The Power LED is solid green when the router is turned on.

The Wireless LED is solid blue. 

The Internet LED is solid green. If it is not, make sure that the Ethernet cable is 

securely attached to the router Internet port, and that the modem is powered on.

 The LAN LEDs (1 through 4) are solid green or solid amber for any computers cabled 

to the router by an Ethernet cable.