Netgear WNHDE111 5GHz 사용자 설명서

Securing My Wireless

4-5

•

Enable Auto Channel Scan. The unit automatically finds the channel with least interference 
and uses that channel. This is enabled by default. If you disable this feature, you can use the 
Wireless Channel option to manually pick a channel.

•

Wireless Channel. When Auto Channel Scan is disabled, use this option to manually pick a 
channel.

•

Channel Width. This field determines which operating frequency is used. It should not be 
necessary to change the wireless channel unless you notice interference problems with another 
nearby wireless network. The WNHDE111 uses channel bonding technology to extend the 
bandwidth for data transmission. 

•

Enable SSID Broadcast. Clear this check box to disable broadcast of the SSID, so that only 
devices that know the correct SSID can connect. Disabling SSID broadcast nullifies the 
wireless network discovery feature of some products such as Windows XP.

•

Wireless Security Mode: WEP or WPA. The selection of wireless security options can 
significantly affect your network performance. The time it takes to establish a wireless 
connection can vary depending on both your security settings and unit placement. 

3. Click Apply to save your settings.

WEP Shared Key authentication and WEP data encryption can be defeated by a determined 
eavesdropper using publicly available tools.

1. Select Wireless Settings under Setup in the main menu.

2. In the Wireless Security Mode section, select WEP. The WEP options display.

3. Select the encryption strength (64 or 128 bit data encryption).

4. Enter the data encryption keys. These values must be identical on all computers and access 

points in your network.

5. Click Apply to save your settings.