Netgear WNHDE111 5GHz 사용자 설명서

Securing My Wireless

4-7

•

Enable Wireless Router Radio. If you disable the wireless router radio, wireless devices 
cannot connect to the Wireless-N AccessPoint/Bridge. If you will not be using your 
wireless network for a period of time, you can clear this check box and disable all wireless 
connectivity.

•

WPS Settings. For information about these settings, see the following section, 

•

Wireless Card Access List. For information about this list, see 

.

.

If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure 
the router’s network name (SSID) and security settings and, at the same time, connect a wireless 
client securely and easily to the router. Look for the 

 symbol on your client device. WPS 

automatically configures the network name (SSID) and wireless security settings for the router (if 
the router is in its default state) and broadcasts these settings to the wireless client. 

When you add wireless clients, whether or not they are WPS enabled, the added devices must 
share the same network name (SSID) and security passphrase. For more information, see 

The Wireless-N AccessPoint/Bridge provides two methods for connecting to a wireless client that 
supports WPS, described in the following sections: 

Note: The Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode 

options are reserved for wireless testing and advanced configuration only. Do 
not change these settings.

Note: NETGEAR’s Push 'N' Connect feature is based on the Wi-Fi Protected Setup 

(WPS) standard (for more information, see 

). All other Wi-Fi-

certified and WPS-capable products should be compatible with NETGEAR 
products that implement Push 'N' Connect.

Note: If you choose to use WPS, the only security methods supported are WPA-PSK and 

WPA2-PSK. WEP security is not supported by WPS.