Netgear WGR614v7 사용자 설명서

Maintenance

5-5

The Attached Devices menu contains a table of all IP devices that the router has discovered on the 
local network. From the Main Menu of the browser interface, under the Maintenance heading, 
select Attached Devices to view the table, shown below.

For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet 
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers 
the devices. To force the router to look for attached devices, click the Refresh button.

The configuration settings of the wireless router are stored within the router in a configuration file. 
This file can be saved (backed up) to a user’s PC, retrieved (restored) from the user’s PC, or 
cleared to factory default settings.

Rx B/s

The current reception (inbound) bandwidth used on the WAN and LAN ports.

Up Time

The amount of time since the router was last restarted.

Up Time

The time elapsed since this port acquired the link.

Poll Interval

Specifies the intervals at which the statistics are updated in this window. Click on Stop 
to freeze the display.

Set Interval

Enter a time and click the button to set the polling frequency.

Stop

Click the Stop button to freeze the polling information.