Netgear JNR1010 사용자 설명서
genie Advanced Home
38
N150 4-Port Wireless Router JNR1010
Note:
If you change the LAN IP address of the router while connected
through the browser, you will be disconnected. You must open a new
connection to the new IP address and log in again.
connection to the new IP address and log in again.
To change the LAN settings:
1.
Select Advanced > Setup > LAN Setup to display the following screen:
2.
Enter the settings that you want to customize.
3.
Click Apply to save your changes.
LAN Setup Screen Settings
You can configure the following LAN settings:
•
LAN TCP/IP Setup
:
•
IP Address
. The LAN IP address of the router.
•
IP Subnet Mask
. The LAN subnet mask of the router. Combined with the IP address,
the IP subnet mask allows a device to know which other addresses are local to it, and
which must be reached through a gateway or router.
which must be reached through a gateway or router.